Filter
Top Products
50 DOMINION SX USER GUIDE
To Access ‘About’ Information:
1. Click About Raritan Serial Console on the Help menu.
An About Raritan Serial Console message appears on top of the Raritan Serial Console
drop-down menu:
Figure 43 Sample of the About Raritan Serial Console Window
2. Click OK to close the About Raritan Serial Console window.
Standalone Raritan Serial Console Installation
Note: You can download the Standalone Raritan Serial Client from the Raritan support Web
site: http://www.raritan.com/support
The standalone Raritan Serial Client (RSC) is used to make direct connections to the target
without going through the Dominion SX GUI application. The user specifies the Dominion SX
address and the port number (target) and then is connected.
The steps in this section install the standalone Raritan Serial Client (RSC).
Standalone Raritan Serial Client Requirements
The following requirements must be met to support the Raritan Serial Console:
• The RSC will function with JRE version 1.4.2_05 or later (except for JRE version
1.5.0_02) . However, for optimum performance, Raritan recommends using JRE 1.5.0
(except, of course for 1.5.0_02).
• Your system may require configuration adjustments depending on the operating system
and browser. The JRE provides configuration instructions with the JRE download.
Browse to the page at
http://www.java.com/en/download/help/testvm.xml to determine
the JRE version currently installed on your system.
If you do not have a compatible version of the JRE, go to http://www.java.com
and
click the Download Now button.
Note: Raritan does not support JRE version 1.5.0_02 for use with the RSC.
• Minimum 1 GHz PC with 512 MB RAM.