Filter
Top Products
CHAPTER 14: POWER CONTROL 165
Power Strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Administrator is in power menu.
Action 1. Enter command to set sequence interval.
2. Press Enter.
3. Enter command to switch off group of outlets.
4. Press Enter.
CLI Input
⋅ powerdelay sequence 2
⋅ off powerstrip PowerStr1 outlet 1,3,7
Scenario #6 Sequence interval for switch on operation
Pre-condition Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Administrator is in power menu.
Action 1. Enter command to set sequence interval.
2. Press Enter.
3. Enter command to switch on group of outlets.
4. Press Enter.
CLI Input
⋅ powerdelay sequence 2
⋅ off powerstrip PowerStr1 outlet 1,3,7
Scenario #7 Power Recycle Interval
Pre-condition Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Administrator is in power menu.
Action 1. Enter command to set sequence and power recycle interval.
2. Press Enter.
3. Enter command to power recycle group of outlets.
4. Press Enter.
CLI Input
⋅ powerdelay sequence 2 cycle 5
⋅ cycle powerstrip PowerStr1 outlet 1,3,7
CLI Association Power Control – Port Association
Description: Power Control Menu
Scenario #1 Association Power Control – Recycle Port Association (Target is
associated to One Outlet)
Pre-condition Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Port Power Association named Target2 is already created and available in
the list.
Outle1 of PowerStr1 is associated to Target2.
Administrator is in Power Control Æ Associations Power Control menu.
Action 1. Select Port Association named Target2
2. Click on Power Recycle Interval and enter value:
3. Press Recycle button.
CLI Input
Power Recycle Interval value: 1 sec.