Filter
Top Products
124 DOMINION SX USER GUIDE
HTTPS Command
The https command is used to control https access and define the port.
The syntax of the https command is:
https [enable <true|false>] [port value]
The https command options are described in the following table.
HTTPS Command
COMMAND OPTION DESCRIPTION
enable <true|false> Enable/Disable HTTP access
port value HTTP server default listen port (tcp)
HTTPS Command Example
admin > Config > Services > https
Https Settings:
Enabled : true
Port : 443
Logout Command
The logout command is used to log out of the current CLI session.
You can log out at any command level.
LPA Command
The lpa command is used to display and set the local port access configuration. Dominion SX
units have one or two local ports, depending on the model. ( Insert reference to App B for the
pinouts for DB9-M and RJ45-F ports):
The syntax of the lpa command is:
lpa [enable <true|false>] [bps value]
The lpa command options are described in Table 30.
Table 30 Lpa Command
COMMAND OPTION DESCRIPTION
none
The lpa command with no parameters specified displays the current
LPA configuration.
enable <true|false>
enable Enable/Disable Local Port access
[bps value]
Local Port speed (bit rate) in bits-per-second. Possible values are:
(1200|1800|2400|4800|9600|19200|28800|38400|57600|115200)
LPA Command Example
The following command enables local port access and sets the baud rate.
admin > Config > Services > lpa enable true 115200