Filter
Top Products
CHAPTER 14: POWER CONTROL 155
Chapter 14: Power Control
Power Control lets you manage the power functions. The following topics are covered in this
chapter:
• Power Control
• Associations Power Control
• Power Strip Power Control
• Power Strip Status
Port Power Associations
You can associate one or more outlets on a powerstrip connected to the DSX to specific DSX
ports.
Create a Port Power Association
To create a port power association:
1. Click the Setup tab, and then click Port Power Association List.
2. Click Add. The Port Power Association screen appears.
Figure 93 Port Power Association Screen
3. Select the port from the drop-down menu in the Port field.
4. Select the power strip name from the drop-down menu in the Power Strip field.
5. Select the outlet to associate with the port from the drop-down menu in the Outlet field.
6. Click Add.
Note: It is not recommended to access the port associated with a power strip via RSC or
Command Line Interface. Accessing the power strip directly will display raw character
stream of commands responding in between DSX and the power strip, while you are write-