Filter
Top Products
CHAPTER 14: POWER CONTROL 163
Administrator is in power menu.
Action 1. Enter command.
2. Press Enter.
CLI Input setpowerport name PowerStr1 type DPCS12 port 1
Scenario #3 Power Strip Configuration after factory reset
Pre-condition Power strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
DSX user has already configured the port as a Power Strip.
Action 1. Log in to DSX unit with administrator privileges via CLI.
2. Go to Maintenance menu
3. Perform Factory Reset
CLI Input Command: factoryreset
CLI Power Association Group
Description: Power Æ PowerGroups menu
Scenario #1 Create new power group.
Pre-condition Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Administrator is in Power Æ PowerGroups menu.
Action 1. Enter Command.
2. Press Enter.
CLI Input Command: addpowergroup name “Test Group” description “Test group”
Scenario #2 Add a port to a power group
Pre-condition Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Administrator is in Power Æ PowerGroups menu.
Action 1. Enter Command.
2. Press Enter.
CLI Input Command: addpowergroupport name “test Group” port port 2
Scenario #3 Add multiple ports to a power group
Pre-condition Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Administrator is in Power Æ PowerGroups menu.
Action 1. Enter Command.
2. Press Enter.
CLI Input Command: addpowergroupport name “test Group” port port 2-4,10
Scenario #4 Remove group member
Pre-condition Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is physically connected to
Port1 of DSX.
Administrator is in Power Æ PowerGroups menu.
Action 1. Enter Command.
2. Press Enter.
CLI Input Command: deletepowergroupport name “Test Group” port 2