Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with PC 5-13
3. Wake (see illustration below) the DCS 465 Camera Back using one or
the other of these two methods.
A. Operate while connected to the AC battery charger/adapter; the
camera back is continually awake in this state.
B. When not connected to the adapter, wake the camera back by
lightly pressing the record button; with an electrically tripped
camera you can also quickly tap the shutter release cable button.
(The camera back sleeps after several seconds of inactivity; as you
complete these steps reawaken the camera back as needed.)
ISO SCSI ID
CARD BUSY
Record button
LCD
Camera back is asleep Typical awake indication