Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with Mac 4-5
A. Mechanically tripped camera.
CAUTION: To simplify making these connections, each cable has
unique connectors at both ends. Cables can only be plugged into one
connector. Therefore, do not force the end of any cable into any connec-
tor; instead, all cables should fit comfortably into their connectors.
NOTE: Your cable release (not supplied) must have a “throw” of at least
5/8-inch in order to extend far enough into the CTM to trip the camera.
The throw is the distance the pin extends from the end of a cable release
when you fully depress the cable release button.
Optional:
Connect
flash sync cable
here.
Mechanical
camera trigger module
(CTM)
(Screw this end
into camera body.)
Cable release
(Screws into end of CTM)
Camera sync cable
(Plug this end into the
body or lens.)
4-pin
3-pin
5-pin