Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with PC 5-23
3. Connect the AC battery charger/adapter to the camera back as de-
scribed earlier in this chapter. Although this step is optional, we
recommend it whenever the camera back is connected to a computer.
4. When you have completed part A or part B of this step, the last device
in the chain should have a cable (with no terminator) connected to
one of its SCSI ports, and the other port should be empty.
BACK OF ONE OR MORE
NON-INTERNALLY TERMINATED
SCSI DEVICES
Empty SCSI Port
BACK OF PC
A. If there is an external SCSI terminator on an otherwise empty SCSI
port on the last device, remove it.
B. If there is an external SCSI terminator between the end of a cable
and a SCSI port on a device, remove the terminator. Reconnect
the cable. (Later, if you remove the DCS 465 Camera Back cable
from your PC, remember to replace this terminator.)