Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with PC 5-53
Quitting — Disconnecting the Camera
Back from the Computer
Complete these steps when you have completed your work with the DCS
465 Camera Back and the PC.
1. If your application is running, quit it now.
2. Turn off your PC.
3. Turn off other SCSI devices if present.
4. (Optional) Disconnect the AC battery charger/adapter if it is con-
nected.
5. (Optional) Disconnect the DCS 465 Camera Back from the computer.
CAUTION: Do not disconnect the camera back from the computer while the
driver image window is open, or even while the computer is on. Doing so
may result in the loss of data from the PCMCIA card in the camera back or
from the hard disk in your computer. Instead, turn off all equipment as
described above before disconnecting the camera back.
Continue in chapter 6 for a description of how to take pictures with the
camera back and your camera.