Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — DCS 465 Camera Back 9-19
DCS 465 Camera Back Operating
Configurations
You can use the camera back in the following configurations.
IMPORTANT: Refer to chapters 4 (Macintosh) or 5 (PC) for specific cabling and
termination details.
DCS 465 Camera Back Supported Configurations
Each row of this table represents a supported configuration. Refer to the following
pages of this section for additional information.
DCS 465 Your PCMCIA AC adapter Connected
Camera Back camera in DCS 465 connected to computer
Yes Yes Yes No No
Yes Yes Yes Yes No
Yes Yes Yes Yes Yes
Yes Yes Yes No (1) Yes
Yes Yes No (2) Yes Yes
Yes Yes No (2) No (1) Yes
Yes No (3) Yes Yes Yes
Yes No (3) Yes No (1) Yes
(1) Although this configuration is supported, we recommend you always use the
AC adapter when connected to a computer.
(2) A supported image-editing application must be running and the driver image
window must be open to obtain images from the camera back in this configu-
ration.
(3) Always protect the imager by using the supplied imager cover when the
camera back is not connected to your camera.