Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with Mac 4-3
Connecting the DCS 465 Camera Back
to Your Camera
Follow the steps in this section to connect the DCS 465 Camera Back to
your camera.
CAUTION: As you complete these steps handle the camera
back — and especially the imager – with extreme caution. A
damaged imager can result in a very expensive repair not covered
by the warranty.
1. Remove the imager cover from the camera back by inserting a thumb
beneath a corner of the cover and separating it from the camera back.
IMPORTANT: Retain the imager cover and immediately replace it at any time
that you remove the camera back from your camera.
CAMERA BACK
IMAGER COVER
Imager (beneath the KG5 filter glass)
KG5 filter glass