Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-27
“An error occurred while
recovering the DCS disk.
All images may not have
been recovered.”
A problem occurred with
the PCMCIA card.
Try again. If the problem
continues, copy images from the
PCMCIA card as needed and
then reformat the card.
If all of these actions do not
resolve the problem, the card
may be unusable, or there may
be a firmware problem as
described just below.
A problem occurred with
the camera back
firmware.
First try the steps listed in the
paragraphs just above.
If those steps do not resolve the
problem, update the camera
back firmware and try again.
“Are you sure you want to
format this disk? If you
proceed, all images or
data will be deleted and
cannot be recovered. This
process will take several
minutes.”
You have clicked on
Format Disk in the
control panel.
Make the appropriate choice. If
you continue, all images and
other files will be erased and
cannot be recovered.
Message Possible Cause Suggested Solution