Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-37
“The Battery in the
Camera is almost
exhausted. Please connect
the AC Adapter.”
The battery needs
charging.
If you are operating without the
AC adapter but are in an
environment where power is
available, attach the adapter,
wait for a short time and try
again.
If neither a power source nor an
adapter is available, you will not
be able to complete this
operation.
We encourage you to charge the
battery before any field
operations. The Specifications
appendix provides the number of
images you can expect from a
fully charged battery.
“The camera is busy.
Please try command again
later.”
You have tried a
command (for example
Copy to Folder), and the
camera back is still
performing another
operation.
Wait for a short time (for
example wait until the red Card
Busy light on the camera back
stops blinking), and then try
again.
Message Possible Cause Suggested Solution