Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-28 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software
“Cannot Take Picture at
this time. Battery is low.”
You have clicked Take
Picture while connected
to an electrically tripped
camera, but the battery
is low.
If you are operating while the AC
battery charger/adapter is
connected, wait for a short time
and try again.
If you are operating without the
AC adapter but are in an
environment where power is
available, attach the adapter, wait
for a short time and try again.
If neither a power source nor an
adapter is available, you will not
be able to complete this
operation.
We encourage you to charge the
battery for at least one hour
before any field operations. A
charged battery provides
approximately 100 images.
“Cannot Take Picture at
this time. Camera is off.”
The camera back is
busy.
The camera can not be
electrically tripped.”
You have tried a
command (for example
Copy to Folder), and the
DCS 465 Camera Back
is still performing
another operation.
Wait for a short time (for example
wait until the red Card Busy light
on the camera back stops
blinking), and then try again.
Message Possible Cause Suggested Solution
Mechanically tripped
cameras can not be
tripped with the Take
Picture button.
Take pictures using your cable
release.