Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11-4 Reference — KODAK Drivers for TWAIN-Compliant PC Applications
Commands
The driver provides a variety of features that allow you to work with
image and sound files on the DCS 465 Camera Back PCMCIA card and
on the PC hard disk. The driver allows you to return from a photographic
shoot, rapidly view the images, and transfer selected images to the PC
hard disk for archival purposes or for later retrieval into your TWAIN-
compliant application. You can then delete some or all of the images on
the camera back PCMCIA card in preparation for making additional
images. Sound files can be played through the driver (if supported by your
PC) and saved to your PC hard disk with their corresponding image. These
features are briefly described in this chapter.
To use these features, you must first install the driver by following the
series of onetime steps described in chapter 5. Then each time you want
to use the driver, you run your TWAIN-compliant application and access
the driver as described in chapter 8. When you do, you will see the
following driver image window on your PC monitor.
As you work with the driver, the settings you choose are automatically
maintained from session to session.
NOTES: If you are using a camera back without a PCMCIA card, and there is an
image in the camera back, you will only see that single image in the driver image
window. As each new image is made, it replaces the single image in the camera
back and in this window.
You choose a command by clicking it with the mouse. Or you can use a key-
board shortcut; to do so, press and hold the Alt key, press the key for the under-
lined letter in the command (for example the “L” in
Last Image), then release both
keys.