Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-42 Preparing for Use with Mac
Accessing the KODAK Driver for
Adobe Photoshop Software
(Macintosh)
Repeat the steps below each time you want to access the KODAK Driver
for Adobe Photoshop software.
1. If the DCS 465 Camera Back and your Macintosh computer are not
connected, turn the computer off and connect them now by following
the directions in “Making the SCSI Connection” earlier in this chapter.
NOTE: You can leave your camera connected to the camera back while you
make this connection. Refer to chapter 9 for an explanation of supported
configurations.
2. Connect the AC battery charger/adapter to the camera back as de-
scribed earlier in this chapter. (Although this step is optional, we
recommend it whenever the camera back is connected to a com-
puter.)
3. If your Macintosh computer is off, turn it on.
4. Run Adobe Photoshop.