Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — DCS 465 Camera Back 9-25
You can operate the camera back while connected to the supplied AC
battery charger/adapter, or you can recharge the battery with the adapter
and then use the camera back in the field without the adapter. The
adapter will run the camera back continuously while it is charging the
battery.
The adapter is a universal unit, with a range of 95–250 volts, 47–63 Hz,
without a switch.
If you are using the camera back in an environment in which a power
outlet is available, for example in a studio or when connected to a com-
puter, we recommend that you operate the camera back while connected
to the AC battery charger/adapter. You can leave the camera back con-
tinuously connected to the adapter even when not in use; once the battery
is fully charged the adapter switches automatically to a slow trickle
charge.
If you are beginning with a dead battery (you notice unusual random
characters on the camera back LCD), follow special charging instructions
in chapters 4 (Macintosh) or 5 (PC).