Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11-34 Reference — KODAK Drivers for TWAIN-Compliant PC Applications
“File Error: Cannot find
WINASPI.DLL.”
The TWAIN compliant
KODAK Driver for ASPI
is installed, but a Future
Domain SCSI Host
Adapter and not an ASPI
compliant host adapter is
installed in the computer.
Reinstall the driver, following the
directions in chapter 5, and
install and select the TWAIN
compliant KODAK Driver for
Future Domain but not the
TWAIN compliant KODAK
Driver for ASPI.
Obtain an ASPI compliant host
adapter, have a technician install
it, and then try again.
The TWAIN compliant
KODAK Driver for ASPI
is installed, as is an ASPI
compliant host adapter,
but the Windows ASPI
files that accompany the
ASPI compliant host
adapter are not installed.
Install the Windows ASPI files
that accompany the ASPI
compliant SCSI host adapter,
then try again.
If for some reason the Windows
ASPI files were not supplied with
your host adapter, contact the
source of the host adapter to
inquire about obtaining them.
Even though you may have
installed ASPI files for other
operating platforms (for example
for DOS), the Windows ASPI
files must be installed to use the
KODAK Driver.
“Firmware file for the
camera is invalid.”
A problem occurred
when downloading
camera back firmware.
Reinstall the TWAIN driver and
try again to download camera
back firmware. If the problem
continues, and there are no other
messages that provide help in
this situation, contact Kodak.
Message Possible Cause Suggested Solution