Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with PC 5-33
D. Wait as the initial screen and then the welcome screen appear.
E. Read the welcome screen and then click C
ONTINUE.
5. When you see the DCS 465 TWAIN
DRIVER INSTALL screen, follow these
steps.
A. Choose the driver option that matches the SCSI host adapter
installed in your computer. Indicate which driver(s) you want to
install by clicking “on” (an X appears to the left of the choice
when it is on) either the DCS ASPI
DRIVER FOR TWAIN, or the DCS
F
UTURE DOMAIN DRIVER FOR TWAIN. Laptop users should choose the
ASPI driver.
IMPORTANT: Do not select both choices unless both types of SCSI host
adapters are installed in your PC.
The ASPI driver is intended for use with applications that are ASPI
compliant for Windows, and not for use with applications that are ASPI
compliant for other operating platforms.
B. Click INSTALL; wait as a box indicates progress in completing the
installation.
C. When you see the DCS TWAIN I
NSTALLATION COMPLETE screen, click
V
IEW README.
IMPORTANT: There are two README files. The one you read at step 3
above applied to the installation process. This README file applies to
using the TWAIN drivers.
D. After reading the file, choose EXIT from the FILE menu; you are
returned to the Program Manager.
6. Eject the driver disk and store it for possible future use.
The KODAK Driver is installed; now you must install the calibration file
for your camera back.