Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-42 Preparing for Use with PC
Accessing a KODAK Driver for
TWAIN-compliant PC Applications
Repeat the steps below each time you want to access the KODAK Driver
for TWAIN-Compliant PC Applications.
1. If the DCS 465 Camera Back and your PC are not connected, turn off
the computer and connect them now by following the directions in
“Making the SCSI Connection” earlier in this chapter.
2. Connect the AC battery charger/adapter to the camera back as de-
scribed earlier in this chapter. Although this step is optional, we
recommend it whenever the camera back is connected to a computer.
3. If you are not using the adapter, wake-up the camera back by lightly
pressing the record button.
4. Turn on the PC.
5. If it has not been configured to start automatically, start Microsoft
Windows.
Accessing the Driver in Selected Software
Applications
All TWAIN-compliant software does not provide access to TWAIN drivers
in the same way. As a result, for demonstration purposes this section
provides examples using the KODAK Drivers with:
Adobe Photoshop 2.5 and 3.0 for Windows
Aldus PhotoStyler 2.0
Aldus PhotoStyler 1.1A
Micrografx Picture Publisher 4.0 and 5.0
Media Cybernetics HALO Desktop Imager 2.01.H