Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with PC 5-17
Installing a SCSI Host Adapter
The DCS 465 Camera Back connects to your PC at a SCSI port provided
by installing one of the supported SCSI host adapter cards described in
chapter 1. If your PC already has a supported card installed, continue at
the next section, “Making the SCSI Connection.” Otherwise continue
below.
CAUTION: Only trained and qualified technical personnel should
perform the following procedure. You should contact a computer service
professional to configure and install an ASPI host adapter card such as
those available from Adaptec, Inc. running EZ-SCSI 3.0 or later or a
Future Domain SCSI Host Adapter card. Customers with laptop comput-
ers can use a PCMCIA-to-SCSI adapter (such as the New Media Bus
Toaster), as described later in this chapter. The installer should read all
manufacturers’ instructions for both the computer and the host adapter
before installing the adapter in your computer.
For Qualified Technical Personnel Only
1. Turn off the power to the computer and all peripherals (turn off the
computer first).
2. If the termination power setting on your SCSI host adapter is disabled,
change its setting to enable it.