Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing for Use with Mac 4-19
3. Connect the AC battery charger/adapter to the camera back as de-
scribed earlier in this chapter. Although this step is optional, we
recommend it whenever the camera back is connected to a computer.
4. Select the SCSI cable with the 25-pin connectors at both ends.
IMPORTANT: Use only the cable supplied with the camera back; do not use
a substitute cable.
25-pin Connector25-pin Connector
SCSI CABLE
5. Attach one 25-pin connector to the SCSI port on the back of the
Macintosh computer. Make sure the connector is well seated by
pressing it into place firmly, and then tighten both knobs on the cable
connector.
Knobs