Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-34 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software
“Firmware Update failed.
Could not find firmware
‘DCS465.BIN’ file from
Macintosh.”
The “DCS465.BIN” file
was not found in the
same folder as the
“KODAK DCS 465” file.
Place a copy of the
“DCS465.BIN” file in the same
folder as the “KODAK DCS 465”
file. The required file may have
an additional letter in the
filename, such as DCS465C.BIN.
The DCS465.BIN file was
supplied by Kodak on the diskette
labeled “KODAK Driver for
ADOBE PHOTOSHOP Software
for use with KODAK Professional
DCS 465 Digital Camera Backs.”
“Firmware Update failed.
Could not load firmware
‘DCS465.BIN’ file from
Macintosh.”
There is an unusual
condition with the driver
for Photoshop.
Choose the driver again from the
Acquire submenu. If the problem
recurs, shut down your
Macintosh computer; restart the
computer and Photoshop, and try
the driver again.
If the condition persists, reinstall
the driver files as described in
“Installing the KODAK
Driver . . .” in chapter 4.
“Firmware Update has
completed successfully.”
You initiated a camera
back firmware update
by clicking on Update
Camera Firmware in the
Control Panel. It was
completed successfully.
Click OK; no other action is
required.
Message Possible Cause Suggested Solution