Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-7
The time and date are maintained by the battery in the DCS 465 Camera
Back. You update the date and time with the S
ET CLOCK choice described
later in this chapter.
You can enter short descriptive material in the text box. Type the material
and then use the mouse or arrow keys to move through text once entered.
The text will be saved with the image (on the PCMCIA card), and will be
saved with the image if it is moved or copied to an archive folder. The
box can hold a maximum of 250 characters.
The text is not obtained when the image is acquired into your TWAIN-
compliant PC application. However, you can copy or cut text from the
text box for the image, and after acquiring the image, you may be able to
paste the text onto the image if supported by the application.
NOTE: If your computer monitor provides a software switch that allows you to
center dialog boxes, you may wish to turn this feature off so that an information
box does not cover images on the screen.
You will not be able to take pictures while the Info box is opened for an image;
close the box and then take the picture.
SOURCE
Allows you to work with images from the DCS 465 Camera Back (choose
C
AMERA from the popup menu), and from all archive files in a folder on the
PC hard disk or on a PCMCIA card in a drive connected to your PC
(choose F
OLDER from the SOURCE menu). When working with a folder, the
folder name appears at the top of the driver image window.
When you open the driver, the software looks first to the source in use at
the end of your previous work session. If that source is not available (for
example if you were using archive files and you have deleted or renamed
the folder you were using), the software will look for the other S
OURCE.