Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-38 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software
Recover Disk complete
but no images were
found.
The PCMCIA card has
been recovered
successfully but there
were no images on the
card.
No action required. If there were
images on the card, they cannot
be recovered.
“Self test has completed
successfully.”
You initiated a self test
by clicking on “Do Self
Test” in the Control
Panel. It was completed
successfully.
Click OK; no other action is
required.
“The Battery in the
camera back is almost
dead. Please connect the
AC Adapter.”
The battery needs
charging.
If you are operating without the
AC adapter but are in an
environment where power is
available, attach the adapter, wait
for a short time and try again.
If neither a power source nor an
adapter is available, you will not
be able to complete this
operation.
We encourage you to charge the
battery before any field
operations. A charged battery
provides approximately 150
images.
“The camera back has
been disconnected.”
The DCS 465 Camera
Back and the computer
have been disconnected.
Turn off the computer, reconnect
the cable, and try again.
Message Possible Cause Suggested Solution