Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6-4 Using the DCS 465 Camera Back
A. Mechanically tripped camera. Press the record button on the
camera back. (The camera back sleeps again in five seconds;
reawaken it, if needed, by pressing the record button again.)
ISO SCSI ID
CARD BUSY
Record button
B. Electrically tripped camera. Press the record button on the camera
back or briefly press the button at the end of the shutter release
cable. (The camera back sleeps again in five seconds; reawaken it,
if needed, by lightly pressing the shutter release cable button
again.)
NOTE: If the button at the end of the shutter release cable is held for too
long (more than 1⁄4 of a second) you will take a picture; therefore, just
briefly tap the button to wake the camera back.
The camera back is asleep when its LCD displays only the graphics
illustrated below. If other data appear on the LCD, the camera back is
awake.