Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — DCS 465 Camera Back 9-33
The PCMCIA card is
not formatted; “E6”
appears on the camera
back LCD.
Format the PCMCIA card as
described in chapters 4
(Macintosh) or 5 (PC) and try
again.
The battery is low. Recharge the battery, or operate
from the AC battery charger/
adapter.
The camera back is
asleep.
Wake the camera back by
pressing the record button, or
operate with the AC adapter or
while connected to a computer.
The PCMCIA card in
the camera back is full.
If connected to a computer,
delete images or erase the
PCMCIA card with the software
driver.
Use another PCMCIA card, if
available.
While using an
electronically tripped
camera, pressing the
camera shutter release
button does not release
the shutter.
Or, while using a
mechanically tripped
camera, releasing the
shutter does not record
an image.
You are not connected
to a computer and
there is no PCMCIA
card in place in the
camera system.
Insert a PCMCIA card or operate
the camera system while
connected to a computer with
the driver image window
opened.
Trouble Possible Cause Suggested Solution
Blinking
Blinks when
battery is
exhausted
Full battery
The Camera back
cannot take exposures
of over three seconds.
Use a shorter exposure time.