Filter
Top Products
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-52 Preparing for Use with PC
2. IMPORTANT: As you complete this step, keep in mind that this
operation will erase all existing data on the PCMCIA card.
If you have an unformatted PCMCIA card in the camera back, click
the FORMAT DISK button, and click the response you want on the
confirmation box that appears.
3. Wait as the software formats the card.
4. If you have more than one card to format, you can remove the current
card as described earlier in this chapter, insert another, and click the
F
ORMAT DISK button again to format the new card. You can also use
this operation to reformat a card that you have been using with the
camera back.
5. Click OK to close the Control Panel.
6. Click C
ANCEL to leave the driver image window.
7. Quit your application.