Filter
Top Products
Legal notices
To avoid making mistakes during operation, we recommend that you carefully follow the instructions provided in this manual.
We have taken a great deal of care whilst programming and checking this software.
Nevertheless, since it is not possible to guarantee totally error-free software applications in all environments and at any time, we unfortunately
cannot rule out the possibility that some errors may have crept in.
MacroSystem Digital Video AG and its dealers therefore do not guarantee fault-free use of the product or complete awlessness of the product.
We will remedy any errors in the program and supply the affected customers with the new software free of charge, if possible.
Warranty claims for defects shall expire in 24 months in the case of newly manufactured items. This shall not apply insofar as the law prescribes
otherwise and in cases involving injury to life, limb or health, in the case of intentional or grossly negligent violation of duty on the part of the supplier
and in the case of malicious silence with regard to a defect.
The customer shall report defects to the supplier immediately in writing. Claims for reimbursement of expenses for error tracing shall be honoured
only after prior consultation with MacroSystem Digital Video AG management staff.
Any other claims asserted by the customer for any expense(s) required for the purpose of subsequent performance, in particular transport, travelling,
work and material costs shall be excluded. However, this shall not apply to claims for reasons other than newly determined software defects.
Warranty claims shall not apply in the case of only insignicant deviation from the agreed quality, for only insignicant impairment of the usefulness,
in the case of natural wear or damage which may occur after passage of the risk due to improper or careless handling, excessive use, unsuitable
operating materials or which have occurred due to other special external inuences not provided for in accordance with the terms of the agreement.
In the event that improper modications or repair work is performed by the customer or any third party, then any warranty claims for defects shall
also be null and void for these and other consequences.
We do not, however, accept any liability for loss of data/time or any consequential damages that may occur as a result, particularly because we have
no inuence over correct software installation and operation by the customer. MacroSystem Digital Video AG and its dealers therefore cannot be
held liable for any defects or unintentional damage in connection with the installation or use of the system.
Claims by the customer to compensation in damages and/or reimbursement of expenses shall thus be excluded, in particular because of violation
of contractual obligations and due to unlawful acts. However, this shall not apply insofar as peremptory liability is involved, e.g. in accordance with
product liability law, in cases of intention, gross negligence, because of injury to life, limb or health or because of violation of substantial contract
obligations. However, any claims to damages for violation of substantial contract obligations shall be limited to conventional foreseeable damage
insofar as intention or gross negligence is not involved or liability due to injury to life, limb or health. A shift of the burden of proof to the disadvantage
of the customer shall not be connected with the above regulations.
Neither MacroSystem Digital Video AG nor its dealers are responsible for any damages resulting either directly or indirectly through the use of the
software or the operating instructions. This is particularly the cause for prot loss and reimbursement of expense.
Any implied guarantee is totally out of the question, including guarantee of suitability of the software or operating instructions for a particular
purpose.
Please therefore ensure that you backup your video footage before using the device. We recommend that you do not delete the video footage and
that you create a backup on DV tape beforehand.
Since it is possible that changes have been made to the software after the manual was printed, the functions shown and described in this manual
might differ from the software.