Filter
Top Products
98
99
classes that are differentiated by way of the rst segment of the address.
For a “normal home network” all you need to know is that there are private address ranges
that are not and cannot be used on the internet and are therefore “free to use”). Under normal
circumstances, it is sufcient if you assign, for instance, the IP address 192.168.0.1 to the PC and the
IP address 192.168.0.2 to the system. Further PCs, devices, etc. can then be assigned addresses that
differ in the last segment of the address.
Then, in order to display the SMART EDIT user interface, all you need do is enter “http://192.168.0.2”
in the web browser on the PC.
Further notes:
• The PC might only react very slowly whilst large les are being transferred from the system
to the PC or from the PC to the system. We therefore recommend you do not work with other
programs during a le transfer and that you close these programs beforehand.
• When starting Ethernet Transfer, there might be a delay if the DHCP function was used
beforehand. The program should start immediately if the IP address has been assigned
manually.
• File transfers via Ethernet are only possible if the Ethernet Transfer program has been
started on the system. It is not possible to work with the system during an active transfer/
connection.
• Audio les cannot be transferred using Ethernet Transfer. If you want to transfer an audio le
from the system to the PC, you must rst of all use the special “Sample->Scene” function to
create a black scene from the audio le that you can then transfer to the PC using Ethernet
Transfer.
• If a le is transferred from the PC to the system, the progress bar is run through twice. The
scene is transferred during the rst step and in the second step it is converted for the SMART
EDIT scene bin.
• In order to maintain as high a level of compatibility as possible with the various PC video
editing programs, a type-2 DV-AVI is saved/created when transferring a scene from the
system to the PC. Alongside the original DV video (in which the audio and video components
are mixed), the audio component is saved separately as an additional component in the le
in accordance with the present AVI standard.
A DV-AVI codec must be installed on the PC before you can play and edit AVI les on the PC.