Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Disassembly & Assembly Disassembly Flow 113
4.2.1 Removing the Housing
This sections describes the removal procedure for printer housing parts. See
below for an illustration of the housing parts.
Figure 4-3. Housing Part Diagram
4.2.1.1 Panel Unit Removal
1. Release the clips on both sides of the control panel unit and pull slightly
away from the R Side Cover.
Figure 4-4. Panel Unit Removal 1/2
Roll Cover
Assembly
Upper Paper Guide
(behind H Top Cover)
R Side Cover
H Top Cover
Lower Paper
Guide
Front Cover
Assembly
L Side
Cover
CHECK
POINT
You may find it easy to remove the control panel if you stand
on the side of the printer and use both hands to pull (squeeze)
the panel towards. This way you remove first the left-side
hook, then you can easily remove the right-side and rear
hooks.
Hooks
Panel
Unit