Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Product Description Maintenance Request 47
Note: The underlined item equals the default.
1.7 Maintenance Request
There are several consumable parts in the printer, and the printer employs
separate counters to keep track of each one. The “Maintenance Req. 0100”
message appears on the display to warn the user when the Waste Ink pads
are about 99% full.
The printer can continue to print even though the “Maintenance Req. 0100*
message appears instead of the “Ready” or “Printing” message. However,
when the waste ink counter determines the Waste Ink pads are 100% full, the
“Service Req 00000100” message appears and the printer can no longer print.
To clear this condition, perform the following.
Replace: The following items must be replaced.
- Waste Ink Pads
- Pump Assembly
- Cap Assembly
- FBox
- Cleaner, Head
Required Adjustments: Perform the following adjustments after replacing
the maintenance parts.
- Waste Ink Counter Clear
(See “Maintenance Mode 2” on page 50)
- Cleaner Counter
(See “Maintenance Mode 2” on page 50)
Table 1-37. Head Alignment Menu
Display Messages Item Notes
PAPER THICK
STD
0.0~1.6mm
Select the thickness, to 0.1mm, of the
paper you are using to check the platen
gap. Normally, leave set to Standard.
ADJUST. PATT.
All
#1~12
Selects which patterns to print. (All
patterns or selected patterns only.)
#1 1~4~7
Bi-D adjust 1 (200cps, Normal Dot, left)
#2 1~4~7
Bi-D adjust 2 (200cps, Normal Dot, right)
#3 1~4
~7
Bi-D adjust 3 (200cps, Micro Dot, left)
#4 1~4~7
Bi-D adjust 4 (200cps, Micro Dot, right)
#5 1~4
~7
Bi-D adjust 5 (300cps, Normal Dot, left)
#6 1~4~7
Bi-D adjust 6 (300cps, Normal Dot, right)
#7 1~4
~7
Bi-D adjust 7 (300cps, Micro Dot, left)
#8 1~4~7
Bi-D adjust 8 (300cps, Micro Dot, right)
#9 1~4
~7
L/R adjust 1 (200cps, Normal Dot)
#10 1~4~7
L/R adjust 2 (200cps, Micro Dot)
#11 1~4
~7
L/R adjust 3 (300cps, Normal Dot)
#12 1~4~7
L/R adjust 4 (300cps, Micro Dot)
CHECK
POINT
The above mentioned items are available as a kit.
Description: MAINTENANCE KIT
Parts code: 1054038