Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Disassembly & Assembly Disassembly Flow 144
6. Perform steps 1 and 2 of the “Replacing the Waste Ink Pads” on page 126.
7. Remove the four (CUPS M4x6) screws securing the Maintenance Base
Assembly to the printer main body and remove the Maintenance Base
Assembly.
Figure 4-65. Removing the Maintenance Base Assembly - 1
Figure 4-66. Removing the Maintenance Base Assembly - 2
Figure 4-67. Removing the Maintenance Base Assembly - 3
8. Shift the Maintenance Base Assembly to the left to release the joint with
the R Side Frame. Then, watching out for the harnesses, lower the
Maintenance Base Assembly and remove it.
Figure 4-68. Maintenance Base Assembly
Screw
(M4x6)
(+) Screw
Driver
Screw (M4x6)
(+) Screw
Driver
Screws (M4x6)
Maintenance
Base Assembly
Pump Motor
Assembly
Flushing Box
Assembly
Cleaner
Head
Pump
Assembly
Cap Assembly