Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Product Description SelecType Settings 40
1.6 SelecType Settings
Entering SelecType mode
To access the control panel settings, press the SelecType button while the
printer is not printing. The printer enters the SelecType mode and cannot
print.
Using SelecType mode
1. Repeatedly press the SelecType button to view the SelecType menus
which appear in the order shown below.
2. Press the Item button to select the choice shown in the LCD display.
3. Press the SelecType button to view the options for that Item.
4. Press the “+” button or “-” button to view the available values for an
option.
5. Press the Enter button to record the current option or to execute the
operation shown in the display.
Exiting SelecType mode
Select one of the following methods to exit SelecType mode:
Press the Pause button while in SelecType mode; the printer is ready
to print.
Perform the printer initialization.
Print a status sheet.
Print a nozzle check pattern.
Replace the cutter.
Press the SelecType button several times at the top level of
SelecType menus.
Press the SelecType button one time at the second level of SelecType
menus.
Table 1-30. SelecType Menus
Display Message For details, see
PRINTER SETTING MENU
“Printer Setting Menu” on page 41
TEST PRINT MENU
“Test Print Menu” on page 42
PRINTER STATUS MENU
“Printer Status Menu” on page 44
PAPER CONFIG. MENU
“Paper Configuration Settings” on page 44
CUTTER REPLACE MENU
“Cutter Replacement Menu” on page 45
HEAD ALIGNMENT MENU
“Head Alignment Menu” on page 46