Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Adjustment Self-Diagnostic Mode Menus 165
5.4 Self-Diagnostic Mode Menus
In the Self-Diagnostic mode, you can select from the following menus.
Figure 5-2. Self-Diagnostic Menu Flow
Table 5-4. Self-Diagnostic Menus
Message Description
Check: Test
Verifies certain information such as RAM, version
number, panel, sensors, fatal-error history and encoder.
Check: Adjustment
Adjusts certain mechanism such as printheads, sensors,
and feed path.
Check: Cleaning
Starts initial ink charge or predetermined cleaning
sequence
Check: Print Prints nozzle check pattern or adjustment parameter list
Check: Parameter Updates or clears all of the adjustment parameters
Check: Life Tests the operation of the printer components.
CAUTION
The "Check: Life" menu contains tests that should only be
performed at the factory, so do not attempt to use this
menu accept where written in this manual.
In Self-Diagnostic mode, all of the tests except for one
(Rear Sensor adjustment) assume that you have loaded
roll paper. Be aware that the printer handles the paper as
if it were roll paper even if you load cut sheets.
All explanations in this mode refer to the printheads in the
following way:
B head = K/C/M side (left head when facing the printer)
C head = Lc/Lm/Y side (right head when facing the
printer)
Check: Adjustment
Check: Test
Check: Print
Check: Cleaning
Check: Parameter
[SelecType]
[Paper Source]
[Enter]
[Pause]
Another
kind of
menu
Check: Life