Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Adjustment USB ID Copy/Backup 201
5.6 USB ID Copy/Backup
Each printer has a unique USB ID which is stored in the NVRAM (EEPROM) on
the C299MAIN board. The USB ID is unique for each printer in the same way a
serial number is unique.
Example USB-ID: NE001XXXXXXXXXXXX0 (X =0~9 or A~Z)
If you need to replace the C299MAIN board during service, then you first need
to copy and back up the USB ID. This operation requires the exclusive SP7000
USB-ID Copy Program as well as:
PC with MS-DOS or Windows 95
Parallel interface connection (compatible mode)
EXTRACTING THE USB-ID COPY PROGRAM
SP7000 USB-ID Copy Program
Found on the #F733: Self Training Kit (P/N: 1053426)
File:/AD_PRO_E/Spro7000.exe (self-extracting file)
extract the file to a folder you make on the root directory of your hard
drive (example: C:/SP7000/ )
PC equipped with Windows 95 or MS-DOS6.2 or above
Parallel interface connection
AFTER EXTRACTING THE PROGRAM
1. After extracting the program, confirm that the following files exist:
readme_e.txt
Spro7000 versionlist.PDF file (tracks upgrades)
Spro7000.EXE file (program file)
2. Read the readme file before using the program
3. See the next page.