Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Disassembly & Assembly Disassembly Flow 116
4.2.1.3 L Side Cover Removal
1. Open the roll paper cover.
2. From the inner side, remove one black screw (CBP:M4x10).
Figure 4-11. L Side Cover Removal 1/2
3. From the rear side, remove one white screw (CUPS:M4x8) and from the
left side remove two white screws (CUPS:M4x8).
Figure 4-12. L Side Cover Removal 2/2
4. Pull off the L Side Cover to the left.
4.2.1.4 I/C Holder Cover Removal
1. Remove the L Side cover as described in 4.2.1.3 “L Side Cover Removal”.
2. Open the I/C Holder Cover.
3. Remove two white screws (CBS:M3x10).
Figure 4-13. I/C Holder Cover Removal
4. Remove the cover and frame.
One
screw
Roll
Cover
Three
screws
L Side
Cover
I/C
Holder
Cover
Two screws
I/C Holde
r
Cover
Frame