Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Adjustment Adjustment Outline 157
5.1 Adjustment Outline
This section describes the adjustment procedures necessary after replacing
certain parts and explains how to perform those adjustment procedures.
Before beginning any adjustment procedure, make sure of the following.
5.1.1 Adjustment Tools
The necessary tools for performing adjustment procedures on this printer are
shown below.
CAUTION
Before starting any adjustment procedure, find the
adjustment procedure you need to perform in Table 5-2 on
page 158 and verify the order or the tasks you need to
perform.
When performing an adjustment procedure, double-check
the detailed instructions and caution information for that
procedure; otherwise you may damage the printer.
To make proper adjustment, make sure to avoid strong
light (sun-light) around the printer. Since this printer uses
photo-sensitive devices (photo-sensors), the printer may
not function properly if it is operated under such
conditions.
When replacing the following, always install a new ink
cartridge.
• Printheads
• Main Board
• "Holder, Assembly, Valve"
Table 5-1. Adjustment Tools
Name Part Code Notes
Tension Gauge
1054053/standard
tool acceptable
Max. 10,000g
Tension Gauge
#F712
B747700300/
standard tool
acceptable
Max. 2500g
Straight edge/ruler
1000mm #F713
1047746/ standard
tool acceptable
Length: 1000mm
Scale Stopper
#714
1047745/ standard
tool acceptable
Used in combination with #F713
(0.1mm scale)
Flash Memory Card
#F727
1050073
standard
PC card
acceptable
Type: 2MB Flash memory card
Standard: Type-II (PCMCIA Rel 2.1/
JEIDA Ver. 4.2)
Voltage: 5V Read/Write
Self-Training Kit
#F733
1053426 CD-ROM based service tool
Schema gauge
standard tool
acceptable
0.6 & 0.7 mm
24 inch roll paper
EPSON special
media
Necessary for mechanism-adjustment
printouts
A3 Tracing paper
Kimoto brand:
MicroTrace
#300LMB
Necessary to determine P_FRONT and
P_REAR sensor volumes
A3 copy paper
standard paper
acceptable
Necessary to determine P_EDGE
sensor volume
Transportation
liquid; S46 (x6)
1045585
For cleaning and transportation
purposes