Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Disassembly & Assembly Disassembly Flow 115
5. Open the Roll Cover and from the inner side, remove one black screw
(CBP:M4x10).
Figure 4-7. R Side Cover Removal 1/4
6. From the rear side, remove one white screw (CUPS:M4x8) and from the
right side remove two white screws (CUPS:M4x8).
Figure 4-8. R Side Cover Removal 2/4
7. Open the front cover and remove one black screw (CPP: M4x12).
Figure 4-9. R Side Cover Removal 3/4
8. Return the Paper Set Lever to the set position, and pull off the R Side
Cover to the right.
Figure 4-10. R Side Cover Removal 4/4
Roll Cover
One
screw
R Side
Cover
Three
screws
One screw on
inside of right
cover
R Side
Cover
Paper Set
Lever in
set
position