Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Product Description SelecType Settings 41
1.6.1 Printer Setting Menu
Notes:
* The printed image is the same size whether the margin is 15mm or 3mm. The
difference is 12mm of paper clearance is added to the top and bottom edges to
make paper feeding more stable and to prevent the paper from rubbing the
printheads.
The underlined item equals the default.
Platen gap
You can adjust the platen gap using this option. (See “Platen Gap
Mechanism” on page 70 for details.)
Roll paper margin
T/B 15MM = the printed image is the same size whether the margin is
15mm or 3mm. The difference is 12mm of paper clearance is added to the
top and bottom edges to make paper feeding more stable and to prevent
the paper from rubbing the printheads.
If the print area is greater than the width of the printable area of the
paper, the printer ignores the extra print data on the right side of the
paper.
Paper size check
You can disable the paper size check to prevent “RELOAD PAPER” errors
which may occur when using very thin paper or paper with low reflective
qualities such as tracing paper.
The print area is determined manually, and the printheads will fire ink
onto the platen if the print area is set larger than the actual paper size.
Table 1-31. Printer Setting Menu
Display Message Options Notes
PLATEN GAP
Auto
Wide
Adjusts the platen gap. (Normally, leave
set to Auto.)
PAGE LINE
ON
OFF
When Auto Cut Off is selected on the
control panel, this setting determines
whether a line for manual cutting is
printed.
INTERFACE
Auto
Para/USB
Option
Determines which interface the printer
checks for data. Auto continuously
checks all interfaces and is good for
normal use.
PARA. I/F
Compat
ECP
Determines the data transfer rate when
using this interface.(Normally, leave set
to Compatible.)
CODE PAGE
PC437
PC850
Character code setting. (PC437:
expanded graphics/PC850: multi-lingual)
ROLL MARG
T/B 15MM
15MM
3MM
Roll sheet margin setting.
• Top/Bottom 15mm*
top and bottom margins = 15mm
left and right margins = 3mm
• 15mm: all margins = 15mm
• 3mm all margins = 3mm
PAPER SIZE CHK
ON
OFF
Determines whether the paper size check
is enabled
PAPER ALIGN CHK
ON
OFF
Determines whether the paper skew
check is enabled
INIT. PANEL Exec.
Initializes control panel setup values to
their defaults