Filter
Top Products
EPSON Stylus Pro 7000 Revision B
Adjustment Self-Diagnostic Mode Menus 173
Record: Maintenance menu
Figure 5-12. Maintenance History Menu
NOTE: The options above appear on the LCD starting from “Waste
Ink R”.
D/A REVISION AND HEAD SIGNAL
For factory use only to check the head voltage and pulse. Do not use.
[Pause] returns you
to previous menu
[SelecType]
[Item]
Fire B: XXXX
Fire C: XXXX
Fire M: XXXX
Fire Lc: XXXX
Fire Lm: XXXX
Fire Y: XXXX
Cut: XXXX
Cut Solen XXXX
Lock Solen XXXX
Waste Ink R: XXXX
Waste Ink L: XXXX
HeadWiper R: XXXX
HeadWiper L: XXXX
Wiper XXXX
HeadRubingR XXXX
Rubbing XXXX
Lever XXXX
Cover XXXX
HeadRubingL XXXX
Ink Lever R: XXXX
Ink Lever L: XXXX
CR Motor XXXX
PF Motor XXXX
Ink Tube XXXX
PrintNumber XXXX
Cleaning XXXX
Table 5-9. Maintenance Record Items
Item Description
Fire x
Amount of ink fired from nozzles in number of megadots (x
= which color)
Cut Number of times cutter has been used
Cutter Solenoid Number of times cutter solenoid has been activated
Lock Solenoid Number of times CR lock solenoid has been activated
Waste Ink R/L Amount of waste ink (right or left)
Head Wiper R/L Number of times head wiping operation has occurred
Wiper Number of times wiper has been used
Head Rubbing R/L Number of times B/C head rubbing operation has occurred
Rubbing Number of times rubbing pad has been used
Lever
Number of times paper has been set (up and down = one
time)
Cover
Number of times front cover has been opened (open and
close = one time)
Ink Lever R/L Not used
CR Motor Accumulated travel distance of carriage (in Km)
PF Motor
Accumulated travel distance of paper feed mechanism (in
Km)
Ink Tube Number of carriage passes
Print Number
Accumulated printout count (each Form-Feed code = one
printout)
Cleaning Accumulated number of cleaning operations