Filter
Top Products
133
Controlling Cameras
Chapter 3 Operations
4
Press the MENU button to close the menu.
Controlling Camera Manually
Control a camera manually supporting the VISCA protocol from this unit.
With the default settings of this unit, focus and iris settings are set to auto, and
white balance setting is set to “no operation”. To control these manually, you
need to set them in the menu.
Carrying out manual control
1
Press the NEXT selection button to which the camera video is assigned.
The camera guide menu appears in the menu display.
If the camera guide menu does not appear, follow the procedure in
“Registering Cameras to be Controlled” (page 132).
A guide to operations appears in the camera control guide.
If the focusing and iris control are set to auto, then “AUTO” appears.
To change the settings manually, see “Setting the Camera Control” (page
137).
Note
1
2
3
4
5
6
Source Name CAMERA1
Input S1-1 Composite
Control Off
OFF
VISCA 1
VISCA 2
VISCA 3
B VISCA 4
VISCA 5
1
2
3
Camera control guide
Guided item