Filter
Top Products
Chapter 3 Operations
70
Video Switching
• The mix state shows the current transition time setting.
• You can still change the transition time at this point. To change the setting,
follow the procedure in “Changing the Transition Time” (page 72).
2
Determine the next program output video, and select this with the NEXT
selection button.
The selected video appears in the PVW viewer.
3
Carry out the transition with the AUTO TRANS button or transition lever.
The NEXT selection video dissolves into the program output video.
Each press of the AUTO TRANS button, or operation of the transition lever,
carries out a dissolve transition from the program output video to the NEXT
selection video.
Switching with a wipe
In a wipe, two video images occupy the display simultaneously, with the area
occupied by one growing until if wipes out the other. You can choose from
sixteen different wipe patterns.
Notes
Current mix state