Filter
Top Products
141
Audio Mixing
Chapter 3 Operations
Audio Mixing
This section describes how to perform mixing on the audio signals input to the
unit, and output the final audio (output program) from the PGM output
connectors.
First assign the audio signals to channel faders, as described in “Audio Signal
Related Settings” (page 59).
1
Press the CH ON button on the front panel to select the channels that you
want to mix.
2
Adjust the levels with the audio channel faders, and carry out mixing.
For audio input/output signal fine adjustment settings, see “Video/Audio
Signal Adjustments and Settings” (page 160).
Adjusting the PGM output audio level
Use the PGM fader on the front panel to adjust the level of audio from the PGM
output connectors.
Adjusting the monitored audio levels
Adjust the levels of the built-in speakers, headphones, and devices connected to
the monitor output connectors with the monitor level adjustment knob on the
front panel.
For the selection of audio to be monitored, see “Monitoring Output Audio”
(page 158).
CH ON
654321
+10
+5
0
-
5
-
10
-
20
-
30
-
40
-
60
-
+10
+5
0
-
5
-
10
-
20
-
30
-
40
-
60
-
CH ON buttons
Audio channel faders
CH ON
MONI LEVEL
0
10
DIM TB
654321
+10
+5
0
-
5
-
10
-
20
-
30
-
40
-
60
-
+10
+5
0
-
5
-
10
-
20
-
30
-
40
-
60
-
PGM
+10
+5
0
-
5
-
10
-
20
-
30
-
40
-
60
-
PGM fader
Monitor level adjustment knob