Filter
Top Products
Chapter 3 Operations
162
Video/Audio Signal Adjustments and Settings
2
1 Select the item (displayed under [Color Matte]) to be adjusted, and
confirm; 2 adjust with the sliders.
As you move the sliders, the sample colors shown in the menu change, so you
can check while making the adjustment.
The items you can adjust are as follows.
[Lum]: Adjusts the luminance.
[Sat]: Adjusts the saturation.
[Hue]: Adjusts the hue.
Applying an Offset to the Program Output Video
You can apply a 7.5 IRE offset to the program output video.
1
Press the MENU button.
2
In the top menu, select [Video Output].
3
1 Select [PGM OUT Level], and confirm; 2 select [Luminance Offset]
from the submenu, and confirm; 3 select [7.5 IRE], and confirm.
Because there is no offset function for PAL, this setting is only enabled when
[PGM OUT] is set to [NTSC].
Setting the RGB Output Signal Format
Set the format of the signal output from the RGB output connectors on the rear
panel.
1
Press the MENU button.
2
In the top menu, select [Video Output].
3
1 Select [RGB OUT], and confirm; 2 select the combination of image size
and frequency or [Video RGB], and confirm.
Note
B Color Matte
Lum 0
Sat 0
Hue 0
Sample colors
12
PGM OUT NTSC
PGM OUT Level
RGB OUT SXGA (60Hz)
Filter Mode
Luminance Offset 7.5 IRE B 0 IRE
7.5 IRE
1
2
3
PGM OUT NTSC
PGM OUT Level
RGB OUT SXGA(59.94Hz)
XGA(1024 x 768) 60Hz
75Hz
B SXGA(1280 x 1024) 60Hz
Video RGB
1
2