Filter
Top Products
Chapter 2 Preparations
60
Settings Related to Input Signals
• If in [Input (L)] you select the DV input connector, the same input
connector is automatically assigned to [Input (R)].
• When a serial digital interface module is installed
- The SDI input connectors for individual channels are displayed.
- If you select CH (1/2) of the SDI input connector for either [Input (L)]
or [Input (R)], CH (1) and CH (2)are assigned automatically to [Input
(L)] and [Input (R)], respectively.
When you select CH (3/4) of the SDI input connector, CH (3) and CH
(4) are assigned automatically to [Input (L)] and [Input (R)],
respectively.
• For DV input, it is not possible to assign more than one selection button to
a single DV input connector. If you attempt to assign to a different
selection button a DV input connector which has already been assigned to
a selection button, a confirmation message appears. If you then select
[OK], the assignment switches to the new selection button, and the
originally assigned selection button returns to the default setting.
• About the DV signal locking time
When DV is selected for the input audio, there is a delay until the DV
signal locks and the audio can be heard.
• When a serial digital interface module is installed
- SDI embedded audio can only be assigned to the channel fader of the
source number assigned to video that is input to the same SDI input
connector. It cannot be combined with analog input video, DV input
video, or video of the other SDI input connector.
Notes
Caution
1
2
3
4
5
6
Source Name
Input (L) MIC/LINE1
Input (R) MIC/LINE1
B MIC/LINE 1
MIC/LINE 2
MIC/LINE 3
MIC/LINE 4
MIC/LINE 5
MIC/LINE 6
LINE 7
LINE 8
SLOT1 DV IN1
SLOT1 DV IN2
SLOT2 SDI IN1 CH(1/2)
SDI IN1 CH(3/4)
SLOT2 SDI IN2 CH(1/2)
SDI IN2 CH(3/4)
When installed in slot 2
1
2
3
4
5
6
Source Name
Input (L) SDI IN1 CH1
Input (R) SDI IN1 CH2
MIC/LINE 1
MIC/LINE 2
MIC/LINE 3
MIC/LINE 4
MIC/LINE 5
MIC/LINE 6
LINE 7
LINE 8
SLOT1 DV IN1
SLOT1 DV IN2
B SLOT2 SDI IN1 CH(1/2)
SDI IN1 CH(3/4)
SLOT2 SDI IN2 CH(1/2)
SDI IN2 CH(3/4)
When CH (1/2) of SDI IN1 is assigned