Filter
Top Products
Chapter 3 Operations
68
Video Switching
3
Press the CUT button.
This interchanges the video in the PGM viewer and PVW viewer, and
switches the program output video.
At the same time, the lit PGM selection button and NEXT selection button
interchange, and the colors of the frames in the source viewer also
interchange.
Each press of the CUT button interchanges the program output video and the
NEXT selection video.
Changing the Video with a Effect Transition
Instead of an instantaneous cut, you can gradually switch from one video to
another through the application of one of various effects.
Basic transition effect operations
The basic procedure for applying an effect to a transition is as follows.
There are two ways of executing a transition:
• Automatic execution with the AUTO TRANS button
• Manual execution using the transition lever
NEXT
INT
654321
PGM
NEXT
INT
654321
PGM
Lit red.
Lit amber.
Lit red.
Lit amber.
Before you press the CUT button
After you pressed the CUT button
Select the next video to be output
using the NEXT selection buttons.
Carry out the transition.
Set the transition effect.
0
M
IC
FTB
DSK
KEY
CUT
AUTO
TRANS
M
I
X
E
F
F
E
C
T
P
V
W
AUTO TRANS button
Transition lever