Filter
Top Products
165
Video/Audio Signal Adjustments and Settings
Chapter 3 Operations
1
Press the ACCESS button in the same column as the channel fader to which
the audio you want to adjust is assigned.
2
1 In the top menu, select [Filter]; 2 select [High Cut (8kHz)] or [Low Cut
(100Hz)].
3
Press the ESC button to close the ACCESS menu.
Adjusting the Equalizer
You can adjust the audio quality by using the equalizer to set frequencies in the
high, middle, and low audio ranges.
1
Press the ACCESS button in the same column as the channel fader to which
the audio you want to adjust is assigned.
2
1 In the top menu, select [EQ]; 2 select [On], and confirm.
3
1 Select an adjustment item from the list, select [On], and confirm; 2
adjust with the slider.
The items you can adjust are as follows.
[High Freq.]: Adjusts the center frequency of the high-frequency band.
[High Level]: Adjusts the level of the high-frequency band.
[Middle Freq.]: Adjusts the center frequency of the middle-frequency
band.
[Middle Level]: Adjusts the level of the middle-frequency band.
[Low Freq.]: Adjusts the center frequency of the low-frequency band.
[Low Level]: Adjusts the level of the low-frequency band.
4
Press the ESC button to close the ACCESS menu.
Phase 16
Input Trim 0dB
Filter Off
EQ Off
Limiter/Compressor Off
High Cut (8kHz)
Low Cut (100Hz)
12
Input Trim 0dB
Filter
EQ Off
Limiter/Compressor Off
Pan CNT
PGM OUT On
AUX1 OUT Off
AUX2 OUT Off
Off
On
High Freq. XXkHz
High Level XXdB
Middle Freq. XXkHz
Middle Level XXdB
Low Freq. XXkHz
Low Level XXdB
12
Input Trim 0dB
Filter
EQ Off
Limiter/Compressor Off
Pan CNT
PGM OUT On
AUX1 OUT Off
AUX2 OUT Off
Off
On
High Freq. XXkHz
High Level XXdB
Middle Freq. XXkHz
Middle Level XXdB
Low Freq. XXkHz
Low Level XXdB
1
2