Filter
Top Products
Chapter 3 Operations
196
Setting Live Streaming Transmission
* If port number 80 is to be used, you can omit [:Port] after the server
address.
For “Server Address,” “Stream Path,” and “File Name,” enter the character
strings set on the unit.
4
Press the Enter key.
Select [Preferences] on the [Tools] menu in Real Player, and configure your
connection settings in accordance with your network environment.
Guidelines for number of Real Player connections depending on
transfer rate (for Own)
The following table shows the number of Real Player connections possible for
each transfer rate.
The figures are guidelines only, and depend on the operating conditions of the
network.
When video/audio deteriorates or stops during streaming
Streaming video/audio deteriorates or stops primarily due to network traffic, the
player software or settings, or insufficient processing power in the computer
running the player software.
If such problems occur, check the above.
When the message “Please wait for a while and reconnect”
appears (for Own)
If Real Player connects to the unit when the ON LINE button of [Live] of
[Output] in the internal server settings (Own) is not pressed, the following
“Please wait for a while and reconnect” standby clip is played. The standby clip
is not played when the external server (Ext) settings are configured.
Note
Note
Transfer rate 768k/512k 384k/256k 150k/64k/56k
Number of Real
Player connections
51020