Filter
Top Products
Chapter 1 Overview
20
Names and Functions of Parts
1 Audio inputs
a Microphone/line input connectors (MIC/
LINE) 1/2 (XLR 3-pin, TRS shared
balanced type)
Input an analog audio signal from a microphone or
audio device.
b +48V switch
Use this switch when a capacitor microphone
requiring a power supply is connected to the
microphone/line input connectors (MIC/LINE) 1/
2. When this is in the ON position, +48V is
supplied.
c Microphone/line input connectors (MIC/
LINE) 3/4/5/6 (TRS balanced type)
Input an analog audio signal from a dynamic
microphone or audio device.
d Line input connectors (LINE) 7/8 (RCA)
Input an analog audio signal from an audio device.
2 Audio outputs
a MIX output connector (MIX) L/R (RCA)
These connect to an external acoustic device to
output audio signals (page 157).
b AUX output connector (AUX) 1/2 (TRS,
balanced)
These connect to an external acoustic device to
output audio signals. The output level can be
adjusted (page 156).
c PGM audio output connectors (PGM) L/
R (TRS, balanced)
These output the final audio (program audio)
created by this unit (page 156).
d Monitor output connectors (MONI) L/R
(RCA)
These provide monitor outputs of any of the PGM/
AUX1/AUX2/MIX audio (page 158).
e Headphone connector (HEADPHONES)
(standard phone jack)
This outputs one of the PGM/AUX1/AUX2/MIX
audio (page 157).
The output level can be adjusted with the front
panel monitor level adjustment knob (MONI
LEVEL) (page 158).
LINE MIC/LINE
MIC/LINE
PUSH PUSH
+
45V
AUDIO IN
87 6543
21
OFF
ON
4 Line input connectors (LINE) 7/8
1 Microphone/line input connectors
(MIC/LINE) 1/2
3 Microphone/line input connectors
(MIC/LINE) 3/4/5/6
2 +48V switch
MIX
HEADPHONES
MONI
AUX PGM
AUDIO OUT
RRL
RL
L21
1 MIX output connector
(MIX)
2 AUX output connector
(AUX) 1/2
3 PGM audio output
connectors (PGM)
5
Headphone connector
(HEADPHONES)
4 Monitor output
connectors (MONI)